Dynatech-elevation

—–

We inform you that Dynatech has been awarded with the Certification of the LBD-300 Overspeed Governor in accordance with the EN 81-1/2:1998 + A3:2009 Standard.

The product’s specification, its manuals for use as well as its Certificates are already available in the Products section in our Website.

We inform you that Dynatech has been awarded with the Certification of the UCM Unit in accordance with the EN 81-1/2:1998 + A3:2009 Standard and that this unit is made up of:

• D-BOX Control System
• QUASAR T25 Ovespeed Governor
• ASG-1XX UD progressive Safety Gear

built in the overspeed governor.

The unit’s specification, its manuals for use as well as its Certificates are already available in the Products section in our Website.

Our entire range of progressive safety gears may be installed in Tandem configuration.

Tandem configuration consists of fitting two units of safety gears into the frame instead of a single one, as usual. This configuration allows doubling the range of the total mass (P+Q) the safety gears may brake, and is valid for the entire range of interlocking rails in Dynatech’s driving bars.

In order to make the assembly and use of Tandem configuration easier, Dynatech designed a system based on the ASG safety gears and their T25 driving bars, both in unidirectional and bidirectional versions. This system has the advantage that only requires a single driving bar shaft. For the system to operate correctly, it is important that the frame manufacturer observes the distances included in the manual for use and maintenance.

There is no pre-set system or configuration for the rest of the Dynatech’s progressive safety gear range, the customer being responsible for fitting the system and manufacturing any element required for its correct operation.

Dynatech has checked the reliability of the Tandem configuration in the entire range of progressive safety gears by making free fall tests in accordance with the official standardisation criteria.

—

You can download it in our website www.dynatech-elevation.com, in PRODUCTS -> SAFETY GEAR FOR LARGE LOADS. TANDEM CONFIGURATION -> SAFETY GEAR FOR LARGE LOADS. TANDEM CONFIGURATION (Click here)

Dear customer,

Dynatech hereby informs you that a new service is to be enabled on its website in the following days: The Customer Area. This service aims at providing you with a better and more customised attention.

To access the customer area, the user name and password we will provide you to access for the first time, will be required; however, once you have accessed, the password is to be changed by another of your choice, one that is easier to remember.

 Once in this area, you may find much more information than the one available on our traditional website up to date. To reach this goal, the website is divided into the following sections:

• Rates: Here you may find the prices of the products according to the conditions you have negotiated with Dynatech. Any new product will be added without requiring to send you a new list. The list will continue to be interactive, displaying full information on the product if you require so, by just clicking on the product name.

• Documents: In this section, you may download any document you require at all times: Certificates of standardisation, quality system, Directive on Lifts, documents from the Notified Bodies, specific Drawings, Videos, Manuals to replace components, etc. The structure of this section will make your fast search for a document easier.

• Technical Queries: Just select the type of component your query refers to and enter the content of the query, so that the system directly sends your communication to the Dynatech person specialising in that product. Response will be much quicker this way.

• GSS: Dynatech has developed new software to select TORNADO gearless machines. It is more powerful and complete than the previous one.

• Orders: In this section, you may select the products you require and directly send the orders, if you wish to use this process.  The system will guide you in the selection and assist you at all times in order to prevent the lack of data or errors in the combinations of particular components, which usually causes a great waste of time in order processing as well as a risk of selecting the incorrect product. In the case of machines, it will be linked to the prior compliance with the report from the GSS. You can always save a copy of the orders placed as well as of the technical reports of the machine selection.

• News: This section displays all the news edited, either per date or label: Expeditions, products, certificates, holiday closures, etc.

• Latest news: Every time a new piece of news is broadcasted, it will be personally received by you in this section, so that all the news, since the last time you accessed the customer area, will be displayed.

• My account: In this section you may change either your user name or password to access this service, as well as the rest of data connected to your account. Please bear in mind the natural mobility of people within the companies they work for. For your own security, it is recommended to change the password the moment the user changes or is no longer professionally linked with your company.

Throughout this week, this new section will be enabled on our website; at first, only with the Tornado Gearless Machine selection (GSS) program. The rest of the above-mentioned modules will be gradually added and you will be duly informed about it.

In short, you will also receive an e-mail informing you about all the e-mail addresses within your company to which access to this area will be directly assigned by default, to which user name and password will be sent, so that you may be aware of it and in case you wish some of the addresses not to have access, or the address is no longer available, etc. Finally, you will individually receive another e-mail including your user name and password.

Dynatech has designed a new rope tensioner system to be used in the STAR, QUASAR T25 and QUASAR SV governors. The ROLLER tensioner system accepts rope diameters of 4 and 6 mm. The information on this new product is already available on our Website.

To obtain this information, just click on the following links:

OVERSPEED GOVERNORS QUASAR > OPTIONAL TENSING SYSTEMS

OVERSPEED GOVERNORS STAR > STAR OPTIONAL TENSING SYSTEMS

The QUASAR T25 overspeed governor is one of the three models in the QUASAR governors’ range. It is an on board overspeed governor with a pulley of Ø120mm to be used with a steel rope of Ø4mm.

This small governor is assembled onto the T25 steering mechanism where, in turn, ASG progressive safety gear is installed; that is to say, Dynatech presents a safety unit made up of governor and safety gear “in a single part”.

The combination of the advanced ASG safety gear’s performance and that of the QUASAR governor allows covering most of the lift installations and, therefore, the customer does not require combining different types of safety gears with different types of governors. QUASAR T25 along with the ASG provides a global solution in a single product.

Its compactness and size allow it to optimally adapt in the case of lifts with reduced pit and/or headroom.

It is remarkably versatile since it may be installed in lifts with a frame of the gantry or cantilever type as well as with the guide rails in the normal or reverse position. It can also be attached to an already installed frame and, therefore, an old lift may be updated to the new safety standards at a low cost.

As you know, Dynatech considers that A3′s UCM must be ensured in the safety components, since if performed using the drive machine brakes, even though the Standard allows it in case of sliding of the suspension ropes, the UCM will not be prevented. Thanks to the small size of the QUASAR’s Governor pulley, we have achieved an ultrafast tripping in the case of a UCM, almost as if it were a car’s parking brake, therefore, safety is ensured at all times.

Dynatech is at your disposal to advise you on the best use of this new product with specific solutions for your lift, no matter if it is standard, of reduced pit, large P+Q, etc.

Due to the serious financial crisis in Spain, the amount of people going to community kitchens, shelters and charity centres has increased alarmingly.   With the aim of alleviating the unprivileged people’s needs somehow, Dynatech has donated 1,2 tonnes of non-perishable food to the Pina de Ebro City Council, which will be shared by the City Council’s community kitchen and Charity Organization CARITAS.

We inform you that our IN-3000 Instantaneous Safety Gear has also been approved for Machined Guide Rails with a thickness of 9 mm. We have modified all the information corresponding to this product in the data sheet on our website, as well as in the manuals for use and maintenance in all the languages.

Please click here to go to the product’s data sheet on our website.

We inform you that Dynatech has been awarded with the Certification of the UCM Unit in accordance with the EN 81-1/2:1998 + A3:2009 Standard and that this unit is made up of:

• D-BOX Control System
• STAR Ovespeed Governor
• ASG-1XX progressive Safety Gear and T-25 Driving Bar

The unit’s specification, its manuals for use as well as its Certificates are already available in the Products section in our Website.